When it comes to soap making molds, you can locate them anywhere. Certainly, you can purchase them online or at many retail craft shops. But, why not just look around your home? You’ll be surprised at how many objects you already have will make for some very neat looking soap bars.
You’ll find an almost endless number of options. You can use old Christmas decorations, dishes, flowerpots, etc. While the simple rectangle is a serviceable shape for soap, the chances are good that as soon as you have gone to all the trouble of making your own soap you may wish to show it as attractively as possible.
O Microwave safe dishes, especially those with individual compartments
O Ice cream cups with fluted sides – those plastic gems often arrive with sundaes in the freezer or from fast food restaurants
O Tin cans for hand milled soap like tuna or sardines. After that you can wrap your soaps using a nautical theme.
O Your craft store will probably have molds for making fancy soaps, and these come in a variety of shapes and sizes. Why not have animal shaped soaps or soaps that look like angels in flight?
O Plastic margarine containers make great larger soaps, which will reduce the amount of times you have to step out of the shower, dripping wet to grab a fresh bar of soap.
O Almost any mold can be used to make a soap-on-a-rope – just make sure you put the rope in far enough that it can’t be pulled out, and the hardening soap should hold it quickly.
O Small wooden molds make for terrific soaps, and the wood grain adds a tremendous natural pattern. Wooden molds can also be designed with removable sides, which makes removing the hardened bar of soap much easier. Wooden molds can also be used to make three-dimensional bars for the exact same reason.
O While pre-made molds are numerous and can be found from many sources, your creativity could probably wind up molds that others have not yet thought up. Therefore, let your imagination run wild and see what choices you can create.
Here’s a few more Raccoon Removal tips:
O when you’re looking for molds, do not forget that plastic and stainless steel are the best substance to use. As you can use glass or ceramics, it may be more difficult to extract the soap from a glass container in one piece.
O When picking plastic molds, be sure they can withstand high heat. A good guideline is that if it is dishwasher safe, it can probably be utilized as a soap mold.
O Thicker is not necessarily better! In your search for a strong mould, you might pick something rigid and thick. But it can be tough to remove soap from these kinds of mold. You are better off selecting a substance which can be bent or warped out of shape to split the connection between soap and mould.
O Unless you would like to cut the mold open to get out the soap, make sure the open end of your mold is larger than the rest of the mold so that the soap may be removed. If you want to produce a three-dimensional soap, then consider using a two-sided mold, as described below.
O Be sensible – while little molds might be pretty, the subsequent bar of soap may be too small to be of practical use. Worse yet, it may slide down the drain. If you though wasting soap were bothersome before, wait until that soap is the amount of your hard work and effort!
O Silicone is a new material for making wax molds. Soft and yet heat resistant, silicone is durable and resist caustic lye well.
So, create some very unique and intriguing soap bars simply by looking around your house for objects you can use as inexpensive soap molds.